News

Glue-coated products are widely used in all aspects. The research on glue-coating technology and equipment has become mature, but the inspection of glue-coated products is currently only at the stage of manual destructive sampling. Glue-coated products cannot be tested for each product due to the current detection methods, so there will be uneven quality of glued parts, which will affect the performance of the entire part. Testing each glued product before putting it into use can detect unqualified glued products in time, which is also conducive to improving the glueing process and improving the quality of the entire glued workpiece.   current situation At present, the automated production lines of many manufacturing enterprises cannot guarantee whether there is insufficient glue or broken glue in the glue line after the automatic glue application is completed, and thus the product quality cannot be guaranteed. Take automobile manufacturing as an example. With the continuous progress and optimization of automobile manufacturing technology, automobile glue coating technology has been increasingly favored by major automobile and automobile parts manufacturers. The quality of glue application has seriously affected the product quality and driving safety of automobiles. In the intelligent and unmanned workshops of manufacturers, glue inspection has also become an indispensable link in the production process. Therefore, it is necessary to provide an intelligent detection technology to solve the above-mentioned problems. 【ATINY】 laser profiler can perform on-line detection of glued products, improve efficiency and reduce the loss of production enterprises.   Working Principle: The cylindrical objective lens is used to expand the laser beam into a strip, the laser is diffused on the target, the reflected light is imaged on the CMOS, and the displacement and shape are measured by checking the changes in position and shape.   what can I do? aTiny laser profiler It can solve the detection quality management problems that cannot be achieved by traditional contact sensors Measure contour, angle, spacing, etc.; Defect

welding robot teaching-free scanning Backgrounds As an important tool for the automation of welding production, industrial robots are widely used in many manufacturing companies. In actual welding, due to the changes in the position and size of the weld seam caused by processing and assembly errors, the welding robot cannot follow the pre-taught trajectory to weld, and the welding quality is reduced. Sensors are indispensable for welding robots from teaching reproduction to intelligence. With the continuous development of industry, the term “intelligent manufacturing” has been mentioned by more and more industrial peoples. For some products with low precision or low tooling and assembly, many companies have introduced welding robots. To meet actual production needs, sensors are the preferred means of automation upgrades.     In the current welding production process Different products need to design different types of production lines and production processes; Similar products, due to different models, usually need to replace the tooling and fixture. There are assembly errors in the assembly process of the workpieces, processing errors in the processing process, differences between the actual welded workpieces and the design patterns, and thermal deformation during the welding process will also cause errors in the welding process... For robot welding, simple teaching usually has a large error. The welding robot teaching-free scanning system is a system independently developed by【ATINY】 that does not require path programming of the workpiece, and has practical significance for teaching. This system can directly perform intelligent and autonomous welding on the weld of the product, which solves the problem that a single small batch of products cannot be automatically welded. Real-time positioning and correction of welding points and trajectories through vision technology is an efficient solution. The strong penetrating laser vision can more effectively solve the interference problems caused by the smoke, arc, and metal splash during the welding process. Ensuring the quality of welding also guarantees the qualit